WDR-3 is a network compatible data logger that records output voltage and ON/OFF(point of contact) signals from various type of sensors and measuring devices and with its network connection allows the user to download the measurements and data.
WDR-3, has a built in network connection function which allows the user to connect to any type of network, including the Internet for the monitoring of real time measurements; giving the user a low-cost way to monitor measurement signals in real time over great distances.
Application Examples
*For instrumentation such as flow meters, wattmeters or analyzers
*Monitoring and recording data of control devices and measurement instruments in factories.
*Collecting recorded data of analyzers for environmental indicators such as acid rain, pH, etc...
*Collecting weather data such as rainfall, snow accumulation, solar radiation, wind speed / direction etc...
*Measurement in places where wiring is difficult or impossible.
Measuring and Managing Instrument Signals
Measure and record analog signals (voltage 0 to 5V) and ON/OFF signals. Number of Channels: 2 channels for Analog Signal, 2 channels for ON/OFF Signal for total of 4 channels.
Two types of measurement method (instantaneous or average) for analog signals, as well as two types of recording method (Pulse Number or Polarity Change) for ON/OFF signals are available to be chosen from for each channel.
Via an Internet Browser it is possible to view Current Measurement Readings, Download Recorded Data
Because the WDR-3 is designed with a built-in WEB server, it can be accessed directly from a browser. Besides checking on current measurements via the browser, it is possible to view all recorded data in list form. Moreover, various communication and operational settings for the WDR-3 can be carried out via a browser.
Note: Network Settings are made using the Network Settings Utility.
Possible to Transmit Recorded Data as an E-mail Attachment to Specified Addresses at a Set Time
The WDR-3 incorporates a Data Sending function which allows for the automatic transmission at regular intervals of recorded data as E-mail attachment. This enables the receiving of recorded data at specific time intervals as set by the user.
Voltage Measurement Range: 0 to 5V
WDR-3 can measure and record input voltage from 0 to 5V. You can choose to record the voltage measurement as the instantaneous value for each recording interval span or as the average value for each recording interval span.
[Recording by Instantaneous Value]
Records measurements at set recording interval.
[Recording by Average Value]
Records the average value of the measurements taken every minute within the set recording interval.
Internet Connection allows for Global Access to Data
The built-in Web Server gives the user the option of putting the data on the Internet for global access. Also by using the Internet connection the user can escape the boundaries of the Local Area Network and gain the freedom to manage and collect data from anywhere the Internet is available. This provides the facilitation of efficient management from remote sites, as well as offering outstanding cost performance.
Set Upper / Lower Limits and Send Warning E-mail
By making upper and lower limit settings for the WDR-3, when one of the set upper or lower limits has been exceeded, warning report e-mails can be sent.
Note: To make use of the warning report e-mail send function, it is necessary to create an environment in order to connect to the Internet or to an in-company (in-house) SMTP/POP server.
Possible to Use Contact Output for Warning Occurrence
When a set upper or lower limit has been exceeded, it is possible not only to send a warning report via e-mail, but it is also possible to use the provided contact output on the main unit to issue a warning within a structured warning system.
Specifications
| |
WDR-3
|
|
Measurement Items
|
Analog Voltage, ON/OFF Signal
|
|
Number of Channels
|
4 Ch (2 Ch for Analog Signal/ 2 Ch for ON/OFF Signal)
|
|
Analog Signal Input
|
Number of Input Channels: 2 Ch for Analog Signal (Common Ground)
Signal Input: Voltage Input
Input voltage Range:0 to 5V (Input Resistance: 1MΩ)
Measurement Resolution: 4.88mV (10bit)
Measurement Cycle: 1min (average of 6 samplings x 10 sec.)
Recording Method:
Instantaneous Value Recording Method:
Data Measurement for each Recording Interval
Average Value Recording Method:
Average of Data Measurements for Recording Interval
Recording Interval:
6 intervals to select from: 10,20,30,40,50 60 min.
Logging Capacity: 2,880 data sets (One data set consists of readings for 2 channels for Analog Signal.)
Recording Mode: Endless Mode (Overwrite oldest data when capacity is full)
Monitoring Function: A warning can be issued when a measurement exceeds a set upper or lower limit for each channel during the set monitoring interval.
|
|
ON/OFF Signal Input
|
Measurement Channels:
2 Ch for On / Off Signal (Common Ground)
Input Signal: Voltage Input, Contact Input
[Input voltage Range: 0 to 15V
Lo(on) Detection Voltage: 1V or below
Hi(off) Detection Voltage: 3V or above
OFF Detection Time: 50ms or above
ON Detection Time: 50ms or above
Pull up: 5V 4.7k
Recording Method
Pulse Recording Method:
Records the number of pulses during the set recording interval (number of rising signals)
Polarity Change Recording Method:
Records the time when a rising/falling signal occurs
Recording Interval:
Pulse Number Recording Method: 6 intervals to select from: 10,20,30,40,50 60 minutes
Polarity Change Recording Method:
Measurement occurs every second without regard to recording interval and the date and time of any change is recorded.
Logging Capacity:
Pulse Number: 2,880 readings
Polarity Change: 760 readings
Recording Mode:
Endless Mode(Overwrite oldest data when capacity is full)
Monitoring Function:
Make monitoring time settings and upper / lower limit settings for the number of pulse signal changes for each channel, when those limit settings are exceeded, a warning notice is sent. It is also possible to make condition settings for signals, and when changes occur outside those conditions during the monitoring period, a warning is sent.
|
|
Power
|
AC Adaptor
|
|
External Contact Output (Warning Output)
|
Contact Output via Photo Repeater
When operating the warning function
OFF-State Voltage: AC/DC 50V or below
ON-State Current: 0.1A or below
ON-State Resistance: MAX 35Ω
|
|
Type of Communication
|
Wired LAN (100/10BASE-T) *1
|
|
Operating Environment
|
Temperature: 0 to 50°C / Humidity: 20 to 80%RH (No condensation)
|
|
Dimensions
|
H83mm x W102mm x D28mm
|
|
Weight of Main Unit
|
About 125g
|
|
Accessories included in package
|
Software Set x1
AC Adaptor (AD-05C1 or AD-0605) x1
LAN Cable (LN-20W)x1
Introductory Guide (including Warranty) x1
|
|
The WDR-3 is designed solely for network communication. It does not include any RS-232 or USB communication interface. To use this product, please make sure to connect it to a network. Moreover, in order to use this product via the Internet, the user will need other devices, such as a router, and must first make necessary arrangements such as establishing an account with an Internet Service Provider for a line and obtaining a fixed IP address, domain, etc.
*1 If you already have the following wireless LAN card, please use as directed. The wireless LAN card which has been tested and proven compatible with WDR-3 is the Dark Marketing Corporation's Wireless LAN card "XI-815".The production and sales of this card have been discontinued.
When making settings in a WDR-3 without any settings already made (when purchased or after resetting), it is necessary to carry out these settings using a wired LAN connection. After having made all the necessary settings via the wired connection, it is possible to use a wireless LAN connection.
|
Temperature loggers for deep immersion. Ideal to measure temperature in w...
Facebook
